Get Free 8GB Of Data From Airtel

Airtel freebies is currently dashing out free data ranging from 1 – 8gb of data. it all depends on your sim eligibility to acquire the highest data. So all Airtel subscribers, kindly dust all your Airtel sims and start acquiring free data which is valid for a month.

How To Activate Your Airtel Sim For 4.2GB@N200 And 23GB@N1000 – Airtel Nigeria is currently giving its users 100% data bonus valid for 3 months. But there is a catch to it, this mind blowing offer are only for users who are eligible and it appears almost all but not all  Airtel subscribers are eligible for this awesome package.

How To Activate Your Airtel Sim For 4.2GB@N200 And 23GB@N1000

How To Activate Your Airtel Sim For 4.2GB@N200 And 23GB@N1000 – Airtel Nigeria is currently giving its users 100% data bonus valid for 3 months. But there is a catch to it, this mind blowing offer are only for users who are eligible and it appears almost all but not all  Airtel subscribers are eligible for this awesome package.

Most Airtel users have been lamenting despite trying different Airtel sim so they also can rock this juicy offer while it last, yet some Airtel users are not eligible.

This article is mainly to help you activate your Airtel sim so you too can enjoy the mouth watery offer while it last. So lets jump right in below.

How To Activate Your Airtel Sim For 4.2GB@N200 And 23GB@N1000

  • Migrate to Airtel Trybe by dialing *312# and Select 1
  • If you get system is busy try again later, just ignore the message and keep trying the code until you are have successfully migrated to Airtel trybe package.
  • You will receive a confirmation message welcoming you to Airtel Trybe
  • You should receive a congratulation message, if not then you can’t qualify for the 100% data bonus.

How To Be Eligible For Airtel 4.6GB for N200

  • Simply send a text message “Send ‘GET’ to 141”
  • If you get a congratulations message as shown below, then you are eligible.

Dear Customer, Congratulations! You can enjoy 100% DATA BONUS ANYTIME EVERYDAY FOR THE NEXT 3 MONTHS when you buy data bundle of N500 and above

AIRTEL Night Crawlers:

Do you have heavy file to download? Then I’ll suggest you make use of Airtel Night plan because its currently the cheapest plan.

To Activate Airtel Night Plan
This plan is exclusively for SmartTRYBE users on Airtel, it means you must migrate to Airtel SmartTRYBE before you can enjoy the offer, dial *312# then reply with 1

To Subscribe to Airtel 1.5GB for N200, 500MB for N25 and 1GB for N500
» Simply dial *312#
» For 500MB which cost N25 and 1.5GB for N200, reply with 3 – Night Plan from 12am – 5am.

Dial *140# to check your balance.

Airtel Freebies: Get Free 8GB Of Data From Airtel

Lets just go straight to the point: Below is the trick to enable you get up to 8GB of free data on your Airtel sim.

Requirement:

  • Any Airtel Sim.
  • With or Without Credit on the Sim

Firstly, Send JOIN to 141 as a text message

airtel4
  • After sending the JOIN to 141, just dial this code *123*133#
  • Wait for the reply, Your going to get up to 8GB, 2GB, 1GB, 500MB . It all depends on your Airtel Sim eligiblity to acquire the highest Data.
  • To check your Data balance: Still dial *123*133#

I actually saw this Airtel trick online few minutes before composing this article. I gave it a trial and the result was awesome. It did work for me and i got Free 2GB of data on my first Airtel Sim and 8GB of data plan on my other Airtel Sim.



Share this on...

Step1: Create Bootable USB Drive

    1. Start PowerISO

    2. Insert the USB drive you intend to boot from.




    3. Choose the menu “Tools > Create Bootable USB Drive”. The “Create Bootable USB Drive” dialog will popup. If you are using Windows Vista or above operating system, you need confirm the UAC dialog to continue.

    4. In “Create Bootable USB Drive” dialog, click “…” button to open the iso file of Windows operating system.

 

  • Select the correct USB drive from the “Destination USB Drive” list if multiple USB drives are connected to the computer.

  • Choose the proper writing method. “USB-HDD” is recommended.

  • Click “Start” button to start creating bootable USB drive.

  • PowerISO will alert you that all data on USB drive will be destroyed. Click “OK” to continue.

    The program will start writing USB drive, and showing the progress information. You should get the message “Writing USB drive completed successfully.” after the operation completes.

 

If no errors occurred in the above process, you should now be all set to setup Windows from USB drive!

Step 2: Configuring the BIOS

You should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so wildly from system to system, but generally entail the following:

    1. Reboot the system.




  • While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen.

  • Go to the section that contains your boot devices.

  • With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.

  • Exit from the BIOS configuration, saving all changes.

Please notice that you can seriously screw up your system by providing incorrect BIOS settings!

 

Step 3: Booting and setup windows from USB drive

Assuming that you properly configured your BIOS and your USB drive supports booting,  Windows setup should now load. Depending on the speed of your USB drive, this may take a while.

If it isn’t working, then double-check the following before making a scene:

  • Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?)

  • Have you correctly prepared the USB drive in step one? (Restart the procedure.)

  • Does your USB drive properly support being booted from? (Try another one!)

 

Share this on...

You can enable Remote Desktop and allow connection from other computers by going to Control Panel -> System -> Advanced System Settings -> click on the Remote tab.

From there, you can either select “Allow connections from computers running any version of Remote Desktop” which is less secure or “Allow connections only from computers running Remote Desktop with Network Level Authentication”. If you are setting up a connection to a different Windows version such as XP or Vista from your Windows 7 machine , then you need to choose the less secure option.

Windows 7 Home Premium Remote Desktop Connection

Tip: Pressing the WIN Key+ Pause/Break keys simultaneously brings up the System window.

If you only see the Remote Assistance box in the Remote tab but not Remote Desktop, that is because there are some restrictions that Microsoft has implemented in your version of Windows. Only Windows 7 Professional, Ultimate and Enterprise can accept connections from Remote Desktop but NOT for Windows 7 Starter, Home Basic and Home Premium. You can however, use Remote Desktop to initiate a connection from any edition of Windows 7.

Many branded laptops and computers come with Windows 7 Home Premium or possibly Home Basic pre-installed, but not to worry because there is a hack patch that can enable the Remote Desktop Connection in Windows 7 Home Premium with a single click.

There is a tool called Concurrent RDP Patcher which is meant to enable concurrent remote desktop connections, which means multiple logons per user. When you log in using the Remote Desktop Connection, the computer that is being controlled will show a message saying “Logged on remotely from COMPUTERNAME”.


If you click on the user icon to login, the remote connection will be terminated with the popup:

Your Remote Desktop session has ended. Another user connected to the remote computer, so your connection was lost. Try connecting again, or contact your network administrator or technical support group.

This allows multiple users to control the remote computer using Remote Desktop.

Windows 7 Concurrent RDP Patcher

Amazingly, this tool also enables the Remote Desktop Connection for Windows 7 Home Premium. The good thing about this patcher is you can revert the changes back to the way it was by clicking the Unpatch button. There are some scripts that can also do the same by patching termsvr.dll file but it doesn’t provide a way to undo the patch.

By default a Remote Desktop Connection only allows you to login with a user account that has a password assigned to it. User accounts with a blank password cannot be used to login with a Remote Desktop Connection. You can handily bypass that restriction by checking the “Enable blank password logons” checkbox.

The Concurrent RDP Patcher tool is released at The Green Button forums, which if you never heard of it before, is the official Windows Media Center Community forum. The patcher was updated a while ago and is confirmed to work on Windows 7 Service Pack 1. It is also compatible with both 32bit and 64bit versions of Windows 7.

Get Your Download Below

Share this on...
Installation of the Windows printer drivers lets you install the Epson POS printer to be a printer under Windows. A lot of POS software requires that you first install the printer in Windows before using it.

Epson Printers Covered

  • TM-T88II

  • TM-T88III

  • TM-T88IV

  • TM-T88V

  • TM-U200

  • TM-U220

  • TM-U230

  • TM-U295

  • TM-U590

  • TM-U675

  • TM-H6000III

For step-by-step instructions on installing Epson drivers for a printer with a specific interface type please choose from the list below:

Serial Interface Installation Guide
Parallel Interface Installation Guide
USB Interface Installation Guide
Ethernet Interface Installation Guide
Wireless Interface Installation Guide
Bluetooth Wireless Installation Guide
IDN Installation Guide

Obtaining the Epson Device Drivers for Windows

To obtain the latest Epson Device Drivers from Epson:



Installing the Device Drivers for Windows


Installing Epson Printer Drivers in Windows

Unpacking the Drivers
After downloading the driver installer from Epson, the drivers need to be unpacked before the installer can run.

Starting the Installation
The installer walks you through selecting the model and interface you are installing drivers for in Windows.

Add the Model of the Printer you have.
Press the ‘Add’ button to add the new printer to Windows.

Selecting the Printer and the Printer Port
Choose the Epson model of the printer installed from the pull-down menu and choose the type of interface in use (serial, parallel, USB, Ethernet, etc.) for the port type.
Specify the options specific to the type of interface you are using. The options will depend on the type of interface card installed in the printer.

Installing the Driver Files
The installer will summarize the drivers selected. You can back up and change the driver here, if necessary.

Completing the Driver Installation
The drivers will now be installed with the model and port sele

 

Share this on...

Search for  Animation Blender Offline Setup, Click on download and save, Then go to your downloaded file and double-click the executable to run Blender.

There is no installer to place Blender on the menu, but there is also no need for administrator rights. With this option, it is possible to have multiple versions of Blender without conflicting, as they are not actually installed on the system.

You Can Also Get It Here

Share this on...

OpenShot Video Editor is a free, open-source video editor for Linux, Mac, and Windows. OpenShot is very easy to use , quick to learn, and surprisingly powerful video editor. Easily cut, slice, and edit any video or film.

The program’s use of FFmpeg means it’s able to properly handle many different video, audio and image formats.

There’s drag and drop support for importing clips, resizing and repositioning them on the program’s multi-track timeline.

Right-clicking a selected clip gives you a quick idea of what can be done, with options including Copy, Paste, Fade, Animate, Rotate, Time (speed or slow the clip), Volume and Slice (trim or cut your movie).

Experienced editors will appreciate the video transitions, overlays, watermarks, title creators and templates, rotoscoping support, key frame animation, and range of digital effects.

Once you’ve finished, a Profile-based Export dialog helps you choose the best file format and settings for Blu-ray/ AVCHD, DVD, device or web use.

Verdict:

OpenShot is a capable video editor with plenty of features and functionality. Just be aware, you may have to spend a little time setting it up and learning how everything works.

Click Title > Animated Titles, for instance, and a dialog explains that you must download and install the open-source Blender, then point OpenShot at its executable, before the feature will work. That’s not difficult, but if you just want something quick and easy then it could be annoying

Click On The Image Below To Download

Share this on...

Windows 7 Activator

Windows 7 activator is a tool that activates your Windows 7 copy in seconds, permanently. You will be able to receive Windows updates after activation process.

You can simple follow the steps on download and use windows 7 activator:

 

  • Download the .zip file.
  • Right click and Extract Files.
  • Run Windows 7 Activator.
  • Click Install button.Apply
  • Wait for a few seconds, then restart your computer.

Frequently Asked Questions


Does this tool provide lifetime activation?

Yes. You won’t see the activate Windows message ever again after using the tool.

Will this tool install anything else?

No. It won’t install anything else. You can also delete Windows 7 Loader after you used it.

May I get Windows Updates after using it?

Yes. You can get any windows update including language packages. You will be able to access all Windows features.

Do I need to disable my antivirus during process?

No. But we highly reccomend you to disable your antivirus software while downloading and using the tool.

Download Windows 7 Activator

You can download Windows 7 Activator here.

 

 

 

Share this on...

DriverPack Solution is a free driver updater tool. with just a few clicks, Driver solution driver finds the proper device drivers for your computer needs and then downloads and installs them for you—no clicking through any wizards or installation prompts.

Because DriverPack Solution is so easy to use and free from the clutter that similar programs have, there are also some features you won’t find in this tool.

Download DriverPack Solution 2017

More About DriverPack Solution

DriverPack Solution has all the driver updater tool features you’d expect:

  • Works with Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP
  • DriverPack Solution is a lightweight program that doesn’t take long to download and connects to the internet for free online driver updates
  • It’s completely portable and can be launched from any folder or hard drive or portable device, like a flash drive
  • You can install all the needed drivers at once
  • Shows the driver version of the current driver as well as the version of the one that it can downloaded to replace it
  • Can list all the drivers, even the ones that don’t need updated
  • The website lets you download specific sets of drivers in a 7Z file, like chipset, Bluetooth, sound, video, etc. Once you’ve downloaded, say, Bluetooth drivers, the 7Z archive has separate folders for different manufacturers like Logitech, Motorola, Realtek, Broadcom, etc.
  • This driver updater can even work if you don’t have a working network. Just download the DriverPack Network driver or the DriverPack Offline version (which has all the drivers in it), and then transfer it the computer that needs it
  • The Diagnostics section serves as a basic system information tool
  • Includes a bulk software downloader that suggests programs you might want to add to your computer
Share this on...

The best way of downloading videos is here. You can download all the flash embedded videos from almost any site with a click of a button. Yes, the flash videos are literally a click away.

After installing IDM, a “Download This Video” button pops up whenever you are watching a video anywhere in cyberspace (shown in the picture below). Just click on the button to start downloading clips. It’s as simple as that; you do not have to separately launch Internet Download Manager. What’s more, you can choose to download a clip at any point during the video, and the scene will be captured from the start. The download will proceed in the background even if you pause or stop watching. And you can download more than one video at the same time.

IDM will start downloading the video and show its standard download dialog. If the server has not specified the file name explicitly, IDM will name the file based on the web page title. You can also edit the filename, add a description, and change its path or category on this dialog.

As we stated you can download videos from almost any website.

You should have an FLV player (or codec or video converter) installed to play FLV videos. You can get more information about FLV player here.

 

Share this on...